APPLICATION
application
01
Available functions with the dedicated T-SENSOR app amos.co
The dedicated app amos.co must be downloaded to operate T-SENSOR.
T-SENSOR (T-1000J) has four functions.
02
On-board functions
- Capture images
- Measure temperatures
- Alert monitoring
- Choose from two available monitoring modes
- Measurement of dirt and debris depth
*TK-2000J-only function
When monitoring the inside of a duct, press the <Capture> button to capture an image.
The temperature inside the duct is measured automatically.
When the temperature in the duct exceeds a set temperature, an alert screen will appear and an alarm will sound.
Choose between two modes: AP Mode, which enables communication within a Bluetooth environment,and ST Mode, which enables communication within a Wi-Fi environment.
03
Mode selection
AP Mode
No need to install routers, access points, or other peripheral equipment
No configuration is required, making it quick and easy to use.
ST mode
Connecting to an access point enables monitoring across a wide area.
Capturing images is faster than with the AP Mode.
04
Alert monitoring
When the temperature in the duct exceeds a set temperature, an alert screen will appear and an alarm will sound to quickly notify the user.
Set the temperature using the “Alert Temperature Settings” in the “Device Settings” from the main screen.
T-1000J
Possible temperature range: 50–70°C (default value is set to 70°C)
TK-2000J
Possible temperature range: 50–150°C (default value is set to 70°C)
